Planet IGS-4215-16T2S Quick Installation Guide

11
 Conguration of the IP address
1.Atthe“IGS-4215-16T2S #” prompt, enter “congure”.
2.Atthe“IGS-4215-16T2S (cong)#”prompt,enterthefollowingcommand
and press <Enter> as shown in Figure 4-4.
IGS-4215-16T2S(cong)#ip address 192.168.1.100 mask 255.255.255.0
IGS-4215-16T2S(cong)#ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Industrial
Managed Switch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Gateway:192.168.1.254
Figure 4-4: Conguring IP Address Screen
3.RepeatStep1tocheckiftheIPaddresshaschanged.
If the IP is successfully congured, the Industrial Managed Switch will apply
the new IP address setting immediately.YoucanaccesstheWebinterface
oftheIndustrialManagedSwitchthroughthenewIPaddress.

Planet IGS-4215-16T2S Specifications

General

Brand	Planet
Model	IGS-4215-16T2S
Category	Switch
Language	English