Need help?Do you have a question about the Planet IGT-1205AT and is the answer not in the manual?
Provides a general description of the media converter's features and capabilities.
Provides a step-by-step guide for the initial setup and installation of the converter.
Guides users on how to install the media converter using different mounting options.
Describes how to correctly connect power wires to the terminal block.
Provides instructions for wiring the fault alarm contacts on the terminal block.
Details how to connect network cables to the media converter ports.
Provides a general description of the media converter's features and capabilities.
Provides a step-by-step guide for the initial setup and installation of the converter.
Guides users on how to install the media converter using different mounting options.
Describes how to correctly connect power wires to the terminal block.
Provides instructions for wiring the fault alarm contacts on the terminal block.
Details how to connect network cables to the media converter ports.
General| Device Type | Media Converter |
|---|---|
| Ports | 1 x 10/100/1000Base-T RJ45 port, 1 x 100/1000Base-X SFP port |
| Transmission Distance | Depends on SFP module |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z |
| Fiber Port | 1 x 100/1000Base-X SFP port |
| Copper Port | 1 x 10/100/1000Base-T RJ45 port |
| PoE Standard | IEEE 802.3af/at |
| Standards Compliance | CE |
To Next Page
