Planet POE-173S User Manual

– 1 – – 2 –
– 3 –
– 4 –
1. Package Contents
Thank you for purchasing PLANET POE-173S Single-Port
10/100/1000Mbps 802.3bt PoE++ Splitter.
Model LAN Port Speed PoE Standard DC Out
POE-173S 10/100/1000Mbps IEEE 802.3at/bt 12V/19V/24V
Please unpack the box of the POE-173S carefully, and the box should
contain the following items:
 802.3bt PoE++ splitter x 1
 User’s manual x 1
 15cm RJ45 cable x 1
 5.5/2.5mm to 5.5/2.5mm DC plug cable x 1
 5.5/2.5mm to 5.5/2.1mm DC plug cable x 1
If any of these are missing or damaged, please contact your dealer
immediately.
2. Product Features
Interface
 2 RJ45 interfaces
 1-port data + power input
 1-port data output
 1-port DC plug-in
 1 DC 12V/19V/24V DIP switch
Power over Ethernet
 Complies with 802.3bt Power over Ethernet Plus Plus PD
 Backward compatible with 802.3at PoE+ with up to 30-watt power
output
 Splits the PoE power over RJ45 Ethernet cable into DC 12V/19V/24V
output
 Distance up to 100 meters
Hardware
 Metal case
 All-in-one compact size design
 PoE usage level LED indicators
 Three-mode (12V/19V/24V) DC output DIP switch
3.ProductSpecications
Product POE-173S
Hardware Specications
Interface
Ethernet
1 x 10/100/1000BASE-T RJ45, Ethernet data
output port
PoE in
1 x 10/100/1000BASE-T RJ45, PoE power
input port
Power socket 1 x DC plug-in
DIP Switch 12V/19V/24V DC output
DC Socket DC receptacle 2.5mm
LED Indicators
PoE in: 30W (Green)
60W (Green)
90W+ (Green)
Data Rate 10/100/1000Mbps
Dimensions (W x D x H) 94 x 70.3 x 39.2 mm
Weight 265g
Installation Desktop/wall mountable/DIN-rail
Enclosure Metal case
Power Requirements 48~56V DC PoE
Unit Output Current
(at 56VDC Input)
With 803.bt type 3 PoE++ input:
● 4.5A@12V DC
● 2.8A@19V DC
● 2.2A@24V DC
With 803.bt type 4 PoE++ input:
● 5A@12V DC
● 3.15A@19V DC
● 2.5A@24V DC
Power Consumption
Ethernet full loading without DC output:
6.5 watts
Full loading with maximum 12V DC, 5A
output: 70 watts
Network
Cable
803.bt PoE
(60W+)
4-pair UTP Cat. 5, 5e, 6 up to 100m (328ft)
802.3at PoE
(30W)
2-pair UTP Cat. 5, 5e, 6 up to 100m (328ft)
Power over Ethernet
PoE Standard
802.3bt Type 3/4 Power over Ethernet
4-pair 802.3at PoE+
Compliant with voltage within 48-56V DC
Power Output DC 12V/19V/24V by DIP switch control
PoE Power Supply Type
End-span + Mid-span
End-span
Mid-span
Power Pin Assignment
1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or
1/2 (-), 3/6 (+); 4/5 (+), 7/8 (-)
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt 4-pair Power over Ethernet
Type 4
Regulatory Compliance FCC, CE
Environment
Operating Temperature 0~ 50 degrees C
Storage Temperature -10~ 70 degrees C
Humidity 5 ~ 95% (non-condensing)
4. Hardware Introduction
4.1 Product Outlook
PoE In
POE-173S
802.3bt PoE
++
Splitter
10/100/1000BASE-T
IEEE 802.3bt
Power over Ethernet Splitter
90W+
60W 30W
PoE In
DC Out Ethernet
10/100/1000BASE-T
12V 19V 24V
Incorrect voltage might cause device damage
CAUTION
Disconnect “PoE In” cable before changing Voltage
Note
Figure 1: POE-173S Outlook

Planet POE-173S Specifications

General

Brand	Planet
Model	POE-173S
Category	Media Converter
Language	English