Why do snowflakes emerge in the output video of Planet VF-402-KIT receiver?
If snowflakes appear in the output video of the Planet Media Converter receiver, it could indicate a bit error during transmission. Verify that the link loss isn't excessive. Ensure the rolling diameter is at least 20CM. Also, unstable transmission may occur if the operating temperature is too high.
What to do if the video indicator of Planet VF-402-KIT optical receiver flashes?
If the video indicator of the Planet Media Converter optical receiver is flashing, it suggests that the receiver isn't getting the correct optical signal. Check if the link loss rate is normal. Ensure the rolling diameter isn't too short (less than 20CM). If there are impurities on the ceramic interface, gently clean it with alcoholic cotton.
Why are there irregular horizontal grain or beating video images on my Planet VF-402-KIT Media Converter?
If you are experiencing irregular horizontal grain or beating video images with your Planet Media Converter, it may be due to incorrect video input synchronization. Check that the grounding electrical level is equal, especially the grounding electrical level of the power of optical transceiver and input & output device. Also, check the connection of video lines and confirm that the input signal complies with the standard.
What to do if Planet VF-402-KIT has abnormal data?
If you are experiencing abnormal data issues with your Planet Media Converter, verify that the data protocol is correct, ensuring compatibility (e.g., 232 transmitting 485). Confirm the transmitting direction is correct (forward, backward, or bidirectional), and that the connection is properly configured (data polarity, transmitting or receiving). Finally, ensure that the data input is correct.
Why is the video indicator of Planet VF-402-KIT optical transmitter OFF?
If the video indicator of the Planet Media Converter optical transmitter is OFF, it indicates that the optical transceiver is not receiving a video signal. Check the video input.
How to troubleshoot abnormal video data on a Planet VF-402-KIT?
If you're getting abnormal video data from the Planet Media Converter, check if the optical output power is normal and within the range of receiving sensitivity.
What to do if all indicators are off on a Planet VF-402-KIT Media Converter?
If all indicators on the Planet Media Converter are off, check if the power adapter works normally. Also, if modules are used, ensure they are correctly inserted into the right slots.
How to fix a Planet VF-402-KIT Media Converter when the power supply indicator is OFF?
If the power supply indicator is OFF on your Planet Media Converter, check if the power plug is loose and inspect the fuse wire of the chassis.
General| Brand | Planet |
|---|---|
| Model | VF-402-KIT |
| Category | Media Converter |
| Language | English |
Explains FCC rules for digital devices and interference mitigation.
Advises on compliance, modifications, and safe operating distances.
Covers electrical safety, static electricity, and general handling precautions.
Details national usage limitations and WEEE disposal regulations.
Lists all items included in the VF-402-KIT bundle.
Details the long-distance analog surveillance transmission system and its capabilities.
Highlights the suitability for industrial environments and wide temperature ranges.
Illustrates various use cases like train stations, factories, and residential setups.
Details 20km transmission, RS485 data, digital technology, and interference immunity.
Provides detailed electrical, optical, and hardware specifications for VF-402-T and VF-402-R.
Shows physical dimensions and mounting considerations for the device.
Describes the front and rear panels, including video, fiber interfaces, and LED definitions.
Details the input and output voltage requirements for the device.
Outlines limitations like point-to-point connection and BNC connector details.
Covers pre-installation checks, reading manuals, safety, and identifying components.
Details the sequence for connecting components, power, and performing checks.
Provides step-by-step instructions for desktop or shelf mounting.
Explains how to mount the device on a rack or a wall.
Offers advice on fiber insertion, terminal blocks, dust caps, and data interface.
Provides solutions for common issues like power, video, and data problems.
To Next Page
