■ Rear Panel:
There is a power interface and power indicator on the rear panel, both PWR is ON
when power on. FIBER is ber interface; the description of each is as follows:
■ Power Supply
Power supply…
Input AC 90~264V, 50~60HZ
Output 5V / 2A
1. The device is a power-required device, it means, it will not work
till it is powered. If your networks should active all the time,
please consider using UPS (Uninterrupted Power Supply) for your
device. It will prevent you from network data loss or network
downtime.
2. In some area, installing a surge suppression device may
also help to protect your converter from being damaged by
unregulated surge or current to the converter or the power
adapter.
To Next Page
Loading...
Need help?
General
