Need help?Do you have a question about the Planet VC-231G and is the answer not in the manual?
General| Maximum data transfer rate | 1000 Mbit/s |
|---|---|
| Auto MDI/MDI-X | Yes |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Material | Metal |
| Product type | Network bridge |
| Product color | Black |
| Power requirements | DC 5V, 2A |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Weight | 184 g |
|---|---|
| Dimensions (WxDxH) | 97 x 70 x 26 mm |
Describes front panel layouts and status LEDs for VC-231G, VC-231GF, and VC-234G models, including port indicators.
Details the rear panel connections and DIP switch for VC-231G, VC-231GF, and VC-234G models.
Details the CO/CPE mode selection for Master/Slave device roles.
Explains G.INP, Interleave, and Band Profile (Asymmetric/Symmetric) options.
Describes how to select the Signal Noise Ratio (SNR) margin for performance tuning.
To Next Page
