15
4. Connecting And Using The VDSL2 Bridge
The Ethernet to VDSL2 Bridge does not require any software
conguration. Users can immediately use any feature of this
product simply by putting the plug in the receptacle and turning
it on. There is some key limitation on the VDSL2 Bridge. Please
check the following items:
¾ The device can be used for Point-to-Point (one CO device
to one CPE device) connection or Point-to-Multipoint (one
multi-port CO device to multi CPE devices) and allows data
and voice to work on the same telephone lines.
¾ The VC-231G and VC-231GF provides only one RJ11
connector for VDSL2 port to build VDSL2 connection. For
voice device connection, there is an additional splitter from
the package of the VC-231G and VC-231GF, which is an ideal
choice.
¾ The VC-234G provides two RJ11 connectors for VDSL2 port.
One for voice device connection (like telephone) and the
other one for VDSL2 network link connection.
¾ Depending on the quality of telephone line, the maximum
distance of one VDSL2 segment is 1.4km (4593ft) with AWG
24 telephone wires. The distance could vary on the quality of
telephone wires.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
