Need help?Do you have a question about the Planet GT-1205A and is the answer not in the manual?
General| Device Type | Media Converter |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z |
| Twisted-Pair Connector | RJ-45 |
| Power Requirement | 5V DC, 2A |
| Power Supply | External power adapter |
| Storage Temperature | -10 ~ 70 degrees C |
| Power Supply Current | 2A |
| Fiber Cable | 50/125µm or 62.5/125µm multi-mode |
| Twisted-Pair Cable | Cat. 5E, 6 UTP cable |
| Data Transfer Rate | 1000 Mbps |
| Weight | 200g |
| Operating Temperature | 0 to 50°C |
| Humidity | 5% to 90% non-condensing |
| Ports | 1 x 10/100/1000Base-T RJ45 1 x 1000Base-SX/LX SFP |
| Dimensions | 70 x 97 x 26 mm |
Describes the GT-1205A as a 3-Port Gigabit Media Converter supporting 10/100/1000Base-T to dual 1000Base-X SFP networks.
Lists standard features like IEEE compliance and interface specifications, including dual SFP slots and auto-negotiation.
Details hardware specifications, ports, cable types, LED display functions, switch processing, fabric, and throughput.
Provides an overview of the GT-1205A, showing the rear, front, top, and bottom panels of the device.
Describes the front panel components, including two 1000Base-X SFP slots and one 10/100/1000Mbps Ethernet RJ-45 Port.
Explains the function of system and port LEDs (PWR, LNK/ACT, Speed) for indicating device status and network activity.
Details the rear panel, highlighting the DC jack for power input (5V DC 2A) and providing a power notice.
Details the side panel, focusing on the DIP switch used for configuring 3-Port Switch or 2-Port Redundant modes.
Provides step-by-step instructions for installing the GT-1205A as a stand-alone unit on a desktop or shelf.
Provides instructions for installing the Gigabit Media Converter into a 10-inch or 19-inch standard rack chassis.
Details how to install the GT-1205A using DIN-Rail mounting with the optional PLANET mounting kit RKE-DIN.
Details the MDI and MDI-X pin assignments for 1000Mbps, 1000Base-T RJ-45 connectors.
Details the MDI and MDI-X pin assignments for 10/100Mbps, 10/100Base-TX RJ-45 connectors.
Provides wiring details and specifications for 1000Base-SX and 1000Base-LX fiber-optic cables, including distance limits.
To Next Page
