Planet MGSW Series User Manual

9
Thefollowingconsolescreenisbasedonthefirmwareversionof
February of 2024 or after.
DefaultUsername: admin
DefaultPassword:sw
+ the last 6 characters of the MAC ID in lowercase
Find the MAC ID on your device label. The default password is "sw" followed
bythelastsixlowercasecharactersoftheMACID.
Model/SN:
MAC:
Managed Ethernet Device
PLANET Technology Corp.
Made in Taiwan
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
WARNING: 1) This device must be earthed. 2) For indoor use only!
SN: ZZZZZZYYMNNNNN
MAC:A8F7E0XXXXXX
MAC ID: A8F7E0XXXXXX
Default Password: swxxxxxx
("x" means the last 6 digits of the MAC address.
All characters should be in lowercase.)
Figure 4-4: MAC ID Label
Enter the default username and password, then set a new password according
to the rule-based prompt and conrm it. Upon success, press any key to
return to the login prompt. Log in with "admin" and the “new password” to
access the CLI.
Figure 4-5: Console Login Screen
The user can now enter commands to manage the Managed Metro Switch. For
adetailed description ofthecommands,pleaserefertothefollowingchapters.

Planet MGSW Series Specifications

General

Brand	Planet
Model	MGSW Series
Category	Switch
Language	English