Need help?Do you have a question about the Planet MGSD-10080F and is the answer not in the manual?
General| Switch Type | Managed |
|---|---|
| Layer | Layer 2 |
| Power over Ethernet (PoE) | No |
| MAC Address Table | 8K |
| Power Input | 12~48V DC, Redundant power with polarity reverse protect function |
| Humidity | 5% to 95% (non-condensing) |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x |
| Jumbo Frame | 9K |
| Storage Temperature | -40 to 85°C |
Details serial connection setup and terminal emulator requirements for console access.
Outlines network connection requirements using Ethernet cables and a web browser.
Step-by-step guide for logging into the switch console via a terminal program.
Instructions for checking and modifying the switch's IP address using console commands.
Steps to save the current running configuration to the startup configuration file.
Process for accessing the web interface and logging in with default credentials.
Steps to set a new permanent password after initial web login.
Instructions on how to save applied changes through the web interface.
To Next Page