Need help?Do you have a question about the Planet FGSD-1022P and is the answer not in the manual?
Details physical ports, Layer 2 features, quality of service, multicast, security, and management.
Provides steps for desktop and rack mounting installation of the switch.
Explains how to access and use the Web interface for switch management.
Covers system information, IP configuration, SNMP, firmware, backup, default settings, and reboot.
Details port control, rate control, status, statistics, sniffer, protect port, and remote ping.
Explains VLAN overview, static, port-based, 802.1Q, Q-in-Q, and GVRP VLAN configurations.
Covers STP theory, illustration, parameters, system, and port configuration.
Explains port trunking, including LACP and static trunk configurations.
Details dynamic MAC table, static MAC table, and MAC filtering configurations.
Covers QoS understanding, configuration, and TOS/DSCP settings.
Explains 802.1X port-based authentication, system, and port configuration.
Details PoE powered devices, power management, and PoE schedule.
Details static port configuration for state, negotiation, speed, and flow control.
Explains how to change username/password, IP settings, reboot, and manage firmware.
Covers QoS configuration, including transmission queues and priority settings.
Provides commands for configuring Spanning Tree Protocol (STP) and MSTP.
Details 802.1x protocol configuration for RADIUS server and timeouts.
Provides commands for configuring IPv4 and non-IPv4 Access Control Lists (ACLs).
Covers PoE commands for status, temperature, limit modes, and port settings.
Details the stages of powering up a PoE link, from detection to normal operation.
To Next Page
General
