Planet FGSD-1022P - Reboot Switch; Reset to Default; TFTP Update Firmware

User’s Manual of FGSD-1022 Series
dhcp
Description:
Set switch as dhcp client, it can get ip from dhcp server.
If you set this command, the switch will reboot.
show dhcp
Description:
show dhcp enable/disable.
6.7.3 Reboot switch
boot
Description:
Reboot (warm-start) the switch.
6.7.4 Reset to Default
erase startup-config
Description:
Reset configurations to default factory settings at next boot time.
6.7.5 TFTP Update Firmware
copy tftp firmware
Description:
Download firmware from TFTP server.
Syntax:
copy tftp firmware <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.
173