User’s Manual of FGSD-1022 Series
4.2.8 Syslog Setting
The Syslog Setting page allows you to configure the logging of messages that are sent to remote syslog servers or other
management stations. You can also limit the event messages sent to only those messages below a specified level.
Figure 4-2-18: Syslog Setting web interface
The page includes the following fields:
Object Description
Syslog Server IP
IP address of syslog server.
Log level None: No send syslog message to syslog server, and Max Age parameters
of the root bridge, regardless of how it is configured.
Major: only send major syslog to syslog server, eg: link up/down, system
warm/cold start
All: send all syslog messages to syslog server.
4.2.9 SMTP Setting
The SMTP alarm allows user to set E-Mail account and receiver account, system will send error message via E-Mail if there
is event happened.
57
To Next Page
Loading...
Need help?
General
