Planet FGSD-1022P - LACP Command

User’s Manual of FGSD-1022 Series
163
no trunk
Description:
Delete an existing trunk group.
Syntax:
no trunk <trunk-id>
Parameters:
<trunk-id> specifies the trunk group to be deleted
6.4.2 LACP Command
[no] lacp
Description:
Enable/disable LACP.
lacp system-priority
Description:
Set LACP system priority.
Syntax:
lacp system-priority <1..65535>
Parameters:
<1..65535> specifies the LACP system priority.
no lacp system-priority
Description:
Set LACP system priority to the default value 32768.
show lacp status
Description:
Show LACP enable/disable status and system priority.
show lacp
Description:
Show LACP information.
Switch(config)# show lacp status
LACP is enabled.
LACP system priority: 32768