User Manual of WDAP-1750AC
-16-
Step 2. Fasten the antennas to the antenna connectors. And you can bend the antennas to fit your actual
needs.
Figure 3-2 WDAP-1750AC Installation Diagram 2
Step 3. Method A - Power socket nearby
Connect he power adapter to the access point’s 12V DC port and plug the power adapter into a power
source.
Method B – Hard to find the power socket
Plug the RJ45 Ethernet cable into the PoE port of the WDAP-1750AC and the other end of Ethernet
cable into the PoE switch.
Method A - Power socket nearby
To Next Page
Loading...
