User Manual of WDAP-1750AC
-58-
5.4 Management
5.4.1 Admin
You can change the password used to login to the browser-based configuration interface here. It is advised to do
so for security purposes.
Figure 5-30 Admin
The page includes the following fields:
Object Description
Administrator Name Set the access point’s administrator name. This is used to log in to the
browser based configuration interface.
Administrator
Password
Set the access point’s administrator password. This is used to log in to
the browser based configuration interface.
Product Name Edit the product name according to your preference. This name is used
for reference purposes.
Management Protocol Check/uncheck the boxes to enable/disable specified management
interfaces (see below). When SNMP is enabled, complete the SNMP
fields below.
SNMP Version Select SNMP version appropriate for your SNMP manager.
To Next Page
Loading...
