Planet WDAP-W3000AX Quick Installation Guide

12
Step 2: Register
 Launch the PLANET CloudViewer/CloudViewerPro app and log in with
your PLANET CloudViewer/CloudViewerPro app. If you don’t have an
account,registeranaccountwithane-mailaddressrst.
Register
Step 3: Bind Devices
1. Log in and go to the device NMSpage
2. Select and enable the PLANET CloudViewer Server – Internet function
3.FillinPLANETCloudVieweraccount(e-mailaddress)andpassword.




IfCloudViewerserverisconnected,theconnectionstatuswillshowsuccess.
If the server fails to connect, the connection status will show authentication
failed.

Planet WDAP-W3000AX Specifications

General

Brand	Planet
Model	WDAP-W3000AX
Category	Wireless Access Point
Language	English