EasyManua.ls Logo

Planet XGS3-24042 - Configure Ip Address

Planet XGS3-24042
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
6.CongureIPAddress
The IP address conguration commands for VLAN1 interface are listed below.
Before in-band management, the Managed Switch must be congured with an
IP address by out-of-band management (i.e. Console mode), the conguration
commands are as follows (All switch conguration prompts are assumed to be
“XGS3-24042”hereafterifnototherwisespecied):
XGS3-24042>
XGS3-24042>enable
XGS3-24042# cong
XGS3-24042(cong)# interface vlan 1
XGS3-24042(Cong-if-Vlan1)# ip address 192.168.1.254 255.255.255.0
ThepreviouscommandwouldapplythefollowsettingsfortheManagedSwitch.
IPv4 Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Figure 6-1 Congure IPv4 address screen
Tocheckthe currentIP addressormodify anewIPaddressfortheSwitch,please
usetheproceduresasfollow:

Other manuals for Planet XGS3-24042

Related product manuals