Need help?Do you have a question about the Plantronics BackBeat 100 series and is the answer not in the manual?
General| Wireless | Yes |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Microphone | Yes |
| Charging Time | 2 hours |
| Connectivity | Bluetooth |
| Wireless Range | Up to 10 meters |
Read the safety guide for important safety, charging, battery, and regulatory information before using your new headset.
Initial pairing process: power on headset, press Call button until 'pairing' is heard and LED flashes red/blue.
Re-enter pairing mode by holding the Call button when the headset is off. Supports connecting up to 2 devices.
Press the Call button until you hear 'power on' or 'power off'.
Tap the Volume up or Volume down buttons.
Tap the Call button.
Press Volume up/down for 2 secs during call to hear 'mute on'/'mute off'.
Double-tap the Call button to dial the last number.
Listen to audio and control playback: play/pause, skip tracks, restart track, play previous track.
Full charge takes 90 minutes; indicator light turns off upon completion.
Try different eartips (small, medium, large) for the best fit in each ear.
Activate voice dialing, search, and controls by pressing Call button for 2 secs and waiting for phone prompt.
Headset attempts to reconnect lost Bluetooth connection. Manual reconnection via phone's Bluetooth menu is also possible.
Re-enter pairing mode by holding the Call button when the headset is off. Supports connecting up to 2 devices.
Easily answer calls from two devices. Receive ringtone notifications for incoming calls from a second paired device.
Headset provides audio feedback for status changes like 'pairing successful', 'mute on', or 'answering call'.
Install the free mobile app for enhanced features, instructions, and support. Available for iOS/Android.
To Next Page
