Plantronics Blackwire C310

To Next Page

Getting started:

Follow the steps below to get call answer/end controls

with your Blackwire headset and Cisco® Unified

Communications Integration for Cisco WebEx

Connect®.

1. Connect your headset to the computer. If this

is the first time you are connecting, wait for

the installation process to complete.

2. To get call control features, please download

the latest version of Plantronics software at

plantronics.com/software.

Note: Check with your IT staff before installing

software on your computer.

Configuring Cisco Unified Communications Integration

for Cisco WebEx Connect to always route call audio to

the headset:

3. Click Edit in the upper left corner of the Cisco

WebEx Connect main screen.

4. Then select Settings.

5. Next choose Audio/Video.

6. Select your Plantronics headset in the drop

down for both Speakers and Microphone.

7. You can also adjust the Speakers and

Microphone volume in this screen.

8. When you are finished, select Save.

Note: USB configuration settings are unique for each USB

port. If you connect the headset to a different port you

will need to make these changes again to set behavior

for that USB port.

Blackwire® C310™/C320™ Quick Setup Guide

Welcome:

Using a Plantronics Blackwire headset

for PC calls will deliver a simpler, more

comfortable and better sounding audio

experience than you could get using just

your computer’s internal microphone

and speaker.

©2012 Plantronics, Inc. All rights reserved. Plantronics, Blackwire, C310 and C320 are trademarks or registered trademarks of Plantronics, Inc. Cisco and Cisco WebEx Connect are registered trademarks of Cisco Systems, Inc. and/or affiliates in the U.S.

and other countries. Published 03.12

Blackwire C310/C320 Key Features:

 Wideband audio with noise-canceling

microphone for high quality PC audio

 Indicator lights and audio alerts give call,

mute, and volume status

 Dynamic EQ feature automatically

adjusts audio for voice or multimedia use

 Monaural (C310), Stereo (C320)

Control Functions:



A. Mute Microphone



B. Volume Adjust

 C. Call Answer/End

*This picture shows the

Stereo (C320) version

Need help?

Do you have a question about the Plantronics Blackwire C310 and is the answer not in the manual?

Summary

Getting Started with Blackwire Headset

Initial Setup and Software Download

Connect the headset to your computer and download the latest Plantronics software for call control.

Configure Cisco Unified Communications Integration

Set Audio Routing for Cisco WebEx Connect

Configure Cisco WebEx Connect to route call audio to the headset for speakers and microphone.

Making and Receiving Calls with Cisco Unified Communications Integration

To Make a Call

Steps to initiate a call to an existing contact or by manually entering a phone number.

To Receive a Call

Instructions for answering incoming calls via notification window or headset controls.