5
MAINTENANCE
1. Unplug the unit from the telephone and the AC adapter
from the power source before cleaning.
2. Clean the equipment with a damp (not wet) cloth.
3. Do not use solvents or other cleaning agents.
SYSTEM RESET
To recover from some fault conditions (refer to the
Troubleshooting Section) you may need to perform a
system reset.
To perform the system reset follow this procedure:
1. Press both the talk button and the mute control
button on the headset for 5 seconds.
2. When the talk indicator light on the headset blinks,
release both buttons.
3. Press the talk button again.
4. Next reset the base unit by disconnecting the AC power
adapter from the AC power adapter jack for
5 seconds, then reconnect.
The system reset operation is complete.
The Plantronics Technical Assistance Center (TAC)
is ready to assist you! Dial (800) 544-4660 x5538
Sunday 5P.M. through Friday, 5P.M. Pacific Time or visit
the Support section of our website at
www.plantronics.com.
Contact TAC for accessibility information.
(04-04)
To Previous Page
Loading...
