Plantronics K100 - CONNECT TO YOUR PHONE; Phone Setup and Discovery; Speakerphone Pairing Mode; Establishing Connection

3
CONNECT TO YOUR PHONE
“Pairing” is the process that
connects the speakerphone
to your phone. You can pair
more phones but can have
only one active connection
at a time.
1. READY
Activate the Bluetooth feature on
your phone, then use the phone’s
settings to add/search/discover
new Bluetooth devices.
iPhone: Settings > General >
Bluetooth > On
(starts the search for devices)
BlackBerry®smartphone:
Settings/options > Bluetooth: On >
Search for devices
2. SET
Firsttime:
With speakerphone turned off,
activate Bluetooth pairing mode
by pressing and holding the
Multi-function button to turn on
speakerphone. The LED flashes
red/blue to indicate pairing mode.
3. CONNECT
Select “PLT_K100” from the list
of Bluetooth devices shown on
your phone.
If the phone asks for a passcode,
enter four zeros (0000). You may
see **** on screen.
Some phones also ask to confirm
the connection after pairing.
The speakerphone LED will stop
flashing red/blue once your phone
is successfully paired/connected.