Virtual Communications Express
Plantronics Legend UC Bluetooth Headset
Pair Mobile Phone
1. Power on your headset, and then:
• Tap and say Pair Mode, or
• Press and hold until you hear Pairing. While the headset LEDs are flashing red and blue,
activate Bluetooth® on your phone and set it to search for new devices.
2. While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone and set it to
search for new devices.
3. Select PLT_Legend.
4. Enter 0000 if prompted by your mobile phone for a passcode. Once successfully paired, the LEDs stop
flashing red and blue and you hear Pairing Successful. Some phones may prompt you to allow access
to contacts to enable caller name announcement.
5. Make a test call from your mobile phone.
6. Press Call to end the call. The call does not end when you remove your headset.
To Next Page
Need help?
General
