EasyManua.ls Logo

Plastimo 810-S - Maintenance; Fresh Water

Plastimo 810-S
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
MAINTENANCE
Rinse the drum unit once a year with fresh water (no dismantling required).
- No other special maintenance is needed.
PROBLEM
ENCOUNTERED
CAUSE SOTUTION
Halyard turns with the
halyard swivel
- Forestay not taut enough ý
- Genoa halyard too slack ý
- Genoa too short, halyard swivel too
low ý
- Genoa halyard too close to the
forestay ý
- tighten the backstay
- tauten the genoa halyard
- Use a strop
- Fasten a halyard feeder to the mast
or a diverter to the forestay
The halyard tends to wrap
itself around the spar when
the genoa is hoisted
- Halyard is worn and thus twists in
the direction of the rope strands ý
- Change the halyard
Reefing line fouls - Wrong angle on reefing line ý
- First sheave too far from drum
unit ý
- Genoa unfurled too quickly ý
- Change position of first sheave
- Slow down the unfurling of the
genoa by winding the reefing line
once round a winch.
Genoa difficult to hoist - Poor output from a sheave
- Halyard jammed ý
- Luffrope too large ý
- Try with a different halyard
- Change luffrope
fresh water

Related product manuals