To Next PageTo Next Page
Need help?Do you have a question about the pleasant hearth PH2200WS Series and is the answer not in the manual?
Covers critical safety warnings regarding installation, operation, and maintenance to prevent house fires.
Lists the various model series covered by this manual.
Essential checks and requirements before installing the wood stove, including local codes and chimney connections.
Explains the importance of flue size for draft and basic operation principles.
Instructions for installing the pedestal base on the HWS-230292 model.
Steps for attaching legs and reinstalling the ash pan for the PH2200WS model.
Procedure for attaching legs to the LWS-2200 model.
Covers initial installation steps, location selection, and clearance requirements from combustibles.
Details on proper stove pipe connection, clearances, bends, and length.
Specifies requirements for floor protection on concrete and combustible surfaces.
Details on chimney types, inspection, height, and connector placement.
Describes the components of the venting system and their function.
Lists the necessary tools and building supplies for installation.
A checklist to ensure the appliance and installation meet all safety and operational requirements.
Outlines the components typically found in a stove system with a masonry chimney.
Lists the components for a stove system using a prefabricated metal chimney.
Details requirements for chimney connectors, thimbles, and the chimney itself.
Specifies diameter, temperature rating, and component requirements for metal chimneys.
Details the necessary components and air clearances for thimble installation.
Step-by-step instructions for constructing and installing a thimble for masonry chimneys.
Discusses chimney height requirements and factors affecting flue draft.
Instructions for installing the chimney connector, including pipe attachment and clearances.
Specifies minimum clearances and placement rules for chimney termination on pitched and flat roofs.
Instruction on how to fully open the air control damper.
Guide on positioning the slide baffle rod to the 'OPEN' position.
Details on arranging kindling and logs for the initial fire setup.
Instructions for loading logs onto the ember bed.
Guidance on adjusting the air control after the fire is established.
Instruction on closing and latching the stove door once the fire is burning.
Instructions for positioning the slide baffle rod to the 'CLOSED' position.
Guidelines on suitable wood types and materials not to burn.
Specific procedures for the first few fires to cure the stove's paint.
Detailed instructions on how to properly start and maintain a fire.
Tips for cleaning and safely replacing the stove glass.
Instructions for replacing door and glass gaskets.
Explanation of creosote formation and the need for its removal.
Methods for minimizing creosote accumulation in the stove and chimney.
Safe procedures for disposing of ashes.
Instructions for operating and maintaining the ash drawer.
Covers optimal wood types and advanced fire starting techniques.
Identifies common causes of poor draft and how to address them.
Maintenance tasks for the baffle, blanket, and optional blower.
Inspection and maintenance for the chimney system and firebricks.
Maintenance checks for the door, glass, and door latch.
Details the terms, conditions, and limitations of the 5-year warranty.
Lists specific circumstances and actions that will void the warranty.
Exclusions for glass, plated parts, wood/pellet stove specific components, and other items.
Steps to follow if warranty service is required, including authorization.
Instructions and importance of registering the product warranty.
General| Brand | pleasant hearth |
|---|---|
| Model | PH2200WS Series |
| Category | Wood stove |
| Language | English |
