EasyManuals Logo

PleasureCraft Engine Group crusader User Manual

PleasureCraft Engine Group crusader
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
36
L510001-05
25-HOUR ENGINE INSPECTION - 8
After the fi rst 25 hours of operation, it is recommended
that the engine be given an inspection. Your boat dealer
or a Crusader servicing dealer should be contacted
to perform the necessary checks and adjustments to
ensure the proper engine performance. The following
maintenance should be performed:
Change the engine oil and fi lter.
Check and clean the primary fuel fi lter (returnless
design fuel system only).
Check the engine alignment.
Inspect the accessory drive belt(s) and check the
tension.
Check all the fl uid levels.
Check the throttle and the shift cable adjustments
and check for freedom of movement.
Cooling System - Inspect all the hoses for leaks,
damage and deterioration. Check all the hose
clamps for adequate tightness.
Exhaust System - Inspect the entire exhaust
system for leaks, damage and deterioration.
Check all the hose clamps for adequate
tightness.
Battery - Check the electrolyte level and specifi c
gravity. Inspect the case for damage. Check the
battery cables and connections.
Engine Assembly - Check for loose, missing
or damaged parts. Pay close attention to
engine mounts, starter and alternator mounting
fasteners.
NOTICE: Crusader Marine Engines assumes no
responsibility for the costs related to the 25-hour
inspection. This is the owner’s responsibility.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PleasureCraft Engine Group crusader and is the answer not in the manual?

PleasureCraft Engine Group crusader Specifications

General IconGeneral
BrandPleasureCraft Engine Group
Modelcrusader
CategoryEngine
LanguageEnglish

Related product manuals