26
Heating
•
Each session of heating takes approximately 25 seconds.
The heating time may vary depending on the usage environment.
•
The heater cannot operate while the Sliding Cover is closed or while the Front
Panel is removed.
•
If you close the Sliding Cover or remove the Front Panel during heating or during
use, the device will go into standby.
•
When the remaining battery level is insucient, heating will not start even if you
press the Button Area.
•
You cannot use the device while it is charging.
1. Start heating.
Hold down the Button Area for at least
1second, until the device vibrates.
The circles in the diagram do not appear on
the device.
2. During heating
The LED indicates the status of heating.
3. Ready for use
The entire LED lights up and the device
vibrates twice.
The device is now ready for use.
To Next Page
Loading...