Configuration settings Operating Instructions MSA 2 CF
20
3 Configuration settings
The MSA 2 CF does not need any setting, except the change of
date/time from time to time.
To go into the calendar menu, press the MENU button twice.
Then, date and time can be modified immediately for MSA 2 CF.
In the MSA 2 CF, the change can be done only in administrator
mode: at the power-on, you have to scan the admin code as
soon as the scanner is enabled.
Date/Time are shown in the format: Month/Day/Year
hour:minutes
:
13/06/12
17:46
MENU
START/OK must be pressed to go in “edit” mode. Then the
desired values can be selected by ()()while the cursor
position can be changed by ()(). When insertion is
completed,press START/OK to confirm the setting. To cancel
instead the operation press STOP/ESC.
Since the MSA 2 has to be calibrated regulary, you can check in
advance the expiring revision date. Just pressing three times the
MENU button you can access such information (mm/yy).
08/12
MENU
To Next Page
Loading...