Accident Prevention Operating Instructions MSA 2 CF
28
8 Accident Prevention
8.1 Operating the Unit
Do not let unauthorized or untrained personnel use the unit.
When the unit is not in operation, avoid unauthorized use by
keeping it in a dry, locked room.
Safe operation of the fusion unit can only be ensured when the
following criteria are fulfilled:
• appropriate transport
• appropriate storage
• operation for the correct purpose
• careful handling and operation
• periodic maintenance
The unit may only be used under surveillance.
All persons involved in the operation of the fusion must be
properly qualified and should follow these Operating
Instructions.
Use of the unit can be dangerous, if the Operating Instructions
are not followed. The unit may not be used in surroundings
having a high risk of explosion.
8.2 Check before Operation
Before each operation, check the unit for damage and whether it
is able to function properly.
8.3 Protection of the Unit
Keep the mains lead and secondary cables away from sharp
edges. Make sure damaged cables are immediately replaced by
an authorized service agent.
Warning
To Next Page
Loading...
Need help?
General