+GF+ MSA 2 CF User Manual

Operating Instructions MSA 2 CF Data Management
23
4.2 Protocol erase
The protocols stored in the internal memory can also be deleted
in the protocol view window.
In the MSA 2 CF just press for 4-5” START/OK. A wastebasket
will appear and, as soon as the user confirms with the green
button, all protocols will be removed.
The action is permitted only to the machine administrator. At the
power-on, you have to scan the admin code as soon as the
scanner is enabled. Then you will be able to delete the protocols
as mentioned above.
4.3 Protocol export
The protocols stored in the internal memory of the MSA 2 CF
can be copied in a memory stick for being analysed in a PC in a
later stage, both in PDF and BINARY format.
Insert the USB stick on the USB connector available on the rear
panel of the machine, then press MENU till a USB memory icon
appears.
Press START/OK to start the data transfer. The screen changes
to the following one

+GF+ MSA 2 CF Specifications

General

Brand	+GF+
Model	MSA 2 CF
Category	Welding Accessories
Language	English