+GF+ SG 160 - Table of Contents

Operating instructions SG 160 Table of contents
I
Table of contents
Page
0 About this manual 1
0.1 Warning messages 1
0.2 Other symbols and notes 2
0.3 Abbreviations 2
1 Safety instructions 3
1.1 Proper use 3
1.2 General safety measures 3
1.3 Working with safety in mind 4
1.4 Disposal 5
1.5 Further safety guidelines 5
2 General 6
2.1 Introduction 6
2.2 Range of application 6
2.3 Copyright 7
3 Product design, equipment 8
3.1 Standard equipment 8
4 Technical specifications 9
4.1 Characteristic data 9
5 Transport and assembly 10
5.1 Packaging 10
5.2 Sensitivity 10
5.3 Intermediate storage 10
5.4 Scope of delivery 10
6 Design and Mode of Operation 11
6.1 Installation 12
7 Fusion Preparation 13
7.1 General information 13
7.2 Heating element settings 13
7.2.1 Temperature setpoint adjustment 13
7.3 Butt fusion preparation 14
7.4 Socket fusion preparations 16
8 Fusion 21
8.1 Butt fusion 21
8.1.1 Preparing for butt fusion 22
8.1.2 Adjusting the fusion Force 24
8.1.3 Fusion process 25
8.1.4 Visual check of welding bead 28
8.1.5 Failure analysis 29
8.2 Socket Fusion 31
8.2.1 Preparing for socket fusion 31
8.2.2 Fusion process 33
8.2.3 Failure Analysis in Socket Fusion 36