Seite 6 von 11
3.1. Mini USB interface
Attention:
To avoid damage to the device, do not connect any external devices other than
an IEC 60601-1-approved computer to the mini-USB interface.
The device features a 5-pole-Mini-B-USB port. It can be used to connect the device to your
workplace computer. The device is portrayed as removable medium in your Windows-
Explorer or Apple Finder.
The mini USB connection of the SD card to your workstation is used for:
- Printing a Measurement report (PDF file)
URL: removable medium:\pdf
- Download Software Updates
Note:
To use the mini USB interface the WLAN interface must be deactivated. If there is
an active WLAN connection, the Mini-USB interface is deactivated.
Note:
All interfaces of the “plusoptiX A12C / A12R” and are positioned upside down, i.e.
the plugs must also be turned upside down before plugging in (i.e. the USB symbol
points downwards).
Note:
The connection over a mini usb cable is available from the supplement “01F” in
the serial number (Example: S/N 120xS-01F-xxxx xxxx). Because of the
technical design, devices with older serial numbers are not compatible.
To Next Page
Loading...
