Plustek MobileOffice D600 Plus - Step 2. Installing the Software

7
Step 2. Installing the Software
1. If your scanner has the power button function, press and hold the scan button 3
seconds to turn on the scanner. If your scanner does not have the power button
function, please skip to procedure 2. (The power button function may or may not be
available depending on the scanner model you purchase.)
2. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the “Add New Hardware Wizard” or
“Found New Hardware Wizard” to be launched.
Note: If your computer was off when you connected the scanner, the “Add New
Hardware Wizard” message will be displayed when you turn the computer on and
when Windows starts.
3. For Windows 7:
When the Setup/Application CD is for several scanner models
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the AutoPlay window.
b. Click on the Yes button if the User Account Control dialog pops up. Follow the
instructions in the pop-up installation message.
c. In the Device Manager window, right-click on this scanner under Other
devices and select Update Driver Software from the pop-up menu. Click
Browse my computer for driver software in the window that appears, and
click the Browse button.
d. In the Browse For Folder window, select the folder or the CD-ROM drive that
contains this scanner’s driver and click the OK button to return to the previous
screen. Click the Next button and click Install this driver software anyway if
the Windows Security window appears. Afterwards, please skip to procedure
5.
When the Setup/Application CD is for one scanner model
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the AutoPlay window.
b. Click on the Yes button if the User Account Control dialog pops up.
Afterwards, please skip to procedure 5.
4. For Windows 8 & Windows 10: