Scan from the Buttons
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1. Place the document or images onto the scanner. (Refer to “
Chapter II.
Scanning
” of this guide for more information in placing paper on the flatbed
glass properly.)
Attention
Place only text documents for OCR purposes.
Do not scan a photo using the OCR button.
2. Do one of the following to start scanning:
z Press the button from the scanner's panel.
z Right-click the icon
in the Windows system tray, and then choose
Execute in the pop-up menu that opens. Click the desired button function
item in the pop-up menu.
The scanner starts to scan immediately and carry out the corresponding action
according to the settings you have set up in the Button Configuration window.
19
To Next Page
Loading...
