5. POWER LED— Indicates the scanner status.
Light Status
On
The scanner is turned on, ready to scan images.
Off
The scanner is off, either because the power is not turned on, or
because the power cord is not properly plugged into an AC power
outlet.
6. SCANNER BUTTONS—You may press any button to perform a predefined
scanning task.
7. SCANNER LOCK (located on the scanner’s underside)— Holds your scanner head
in place during transportation.
8. POWER SWITCH— Use this to turn the scanner ON or OFF.
9. POWER RECEPTOR— Connects the scanner to a standard AC power outlet by
the AC adapter included.
10. USB PORT— Connects the scanner to a USB port on your computer by the USB
cable included.
6
To Next Page
Loading...
