PNY Attache - PNY Attaché Features and Specifications; Key Product Features; Computer System Requirements; Operating System Compatibility

USB 2.0 FLASH DRIVE
________________________________________________________________________________________
Page 4 of 11 91004242B
1.2 Product Features
• Compatible with USB specification revision 2.0 and 1.1
• Transfer rate up to 480Mbit per second at “full speed”
• Built-in USB 2.0-to-Flash Interface controller with bulk-only transport of USB mass storage
class, support PIO mode 4.
• Support Windows
®
98/ Windows
®
98SE with device driver
• Support Windows
®
2000/ Windows
®
ME/ Windows
®
XP/ Mac 9.x or above/ Linux2.4.0 or
above, without any device driver
• LED indicator when the USB Flash Drive is in use
• Write/delete protection switch. Protect you from accidentally deleting of data
• Hot Plug & Play - Enable you to install anytime
• Durable solid-state storage - Data retention for at least 10 years
• No external power is required - DC 4.5V ~ 5.5V from USB port
• Power consumption <145mA when in use
• EMI Compliance (FCC , CE)
1.3 Product Characteristics
1.3.1 Computer System Requirement
- IBM PC or Compatible PC or Notebook with USB interface
- CD-ROM drive
1.3.2 Operating System Requirement
- Windows
®
98/98SE
- Windows
®
2000
- Windows
®
ME
- Windows
®
XP
- Mac
®
OS 9.x or above
- Linux
®
Kernel 2.4.0 or above
1.3.3 Technical Parameters
- Capacity: 128MB, 256MB, 512MB
- Erase Cycle: 1,000,000 times
- Data Transfer Rate:
Read: up to 5.5MB/s
Write: up to 5.2MB/s
- Acoustic noise: 0 dB @ one meter
- Altitude: 80,000 (feet relative to sea level)
- Shock resistance: 1000G (max)
- Vibration: 15G peak to peak
- Connectivity: USB Port Type A