EasyManua.ls Logo

Pocket Wizard Plus II - Technical and Regulatory Information; Technical Specifications

Pocket Wizard Plus II
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
13
TECHNICAL INFORMATION
Frequency: 344.04 Megahertz
Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Minimum receive Contact Time: 80 milliseconds
Maximum Frames Per Second: 12
Top Ports: 3.5mm (1/8") mono miniphone
CAMERA / FLASH Port Voltage Handling: up to 100 Volts
FLASH Port Voltage Handling: up to 200 Volts
CAMERA / FLASH = center positive; FLASH = non-polarized
Both ports are current limited: 4 Amp peak, 250 millamp continuous
CAMERA / FLASH Port and hot shoe mount voltage present: 3.3 Volts DC.
A camera is protected from a flash connected to either port.
AC Adapter jack: 3V DC 200mA (unregulated), Center Positive
Male plug connector required: 1.3mm ID, 3.4mm OD, 1cm long
Body Dimensions: 1.4" deep x 2.1" wide x 4" tall
Antenna: 2.4" tall, 0.3" diameter
Weight: Less than 5 ounces with alkaline batteries
Operating temperature: above -15° C (5° F) and below 50° C (120° F)
Storage temperature, without batteries: above -30° C (-22° F) and
below 85° C (185° F)

Related product manuals