Firmware Update 70
5. Switch off the Device by pressing button On/
Off
6. Switch on the Device by pressing On/Off
7. During boot press and hold both and
buttons simultaneously until the message Firmware
update… is displayed on the screen
8. Follow the on-screen instructions
9. Wait for the message on the screen: Please
connect power cable, and then connect USB cable to
the Device
NOTE You can check your Firmware ver-
sion in Main menu > Conguration > About device
If the rmware le is located in the Device’s root folder,
it will have a higher priority in comparison with the le
stored on the SD card during the update process.
To Next Page
Loading...
