Point Mobile PM67 Quick Start Guide

Charging the Device
1. Assemble the AC/DC power supply, country plug and
USB type C cable.
2. Connect the USB type C cable to PM67.
3. Provide power by plugging the power supply to the
wall socket.
You can charge the device with charging cradles (Sold
separately), too.
< Caution >
1. Always use an original power supply from Point Mobile.
Other chargers and cables may damage the PM67.
The device warranty does not cover any damage caused by
the usage of non-original power supplies.
2. Make sure the charger and cable is not wet.
LED Indicator
1
2
No
Indicator
Status
Indication
1
Power
LED
Solid
red
Charging
the device (With charger)
/
Battery is low (Without charger)
Blinking
red
Charging
temperature is too low or
high
(With
charger)
/
Battery is critical low (Without charger)
Solid
green
Device
is fully charged
2
Notification
LED
Blinking
blue
Notification
existing
Red
flash
Barcode
reading failed
Blue
flash
Barcode
reading success

Point Mobile PM67 Specifications

General

Brand	Point Mobile
Model	PM67
Category	Handhelds
Language	English