To Next PageTo Next Page
Need help?Do you have a question about the Point Mobile PM450 and is the answer not in the manual?
General| Processor | Qualcomm Snapdragon 660 |
|---|---|
| RAM | 4GB |
| Storage | 64GB |
| Rear Camera | 13MP |
| Front Camera | 5MP |
| Wireless LAN | 802.11 a/b/g/n/ac |
| WWAN | 4G LTE |
| GPS | Yes |
| NFC | Yes |
| Operating Temperature | -20°C to 60°C |
| Operating System | Android |
| Touch Panel | Capacitive, multi-touch |
| Barcode Scanner | 2D imager |
| Bluetooth | Bluetooth 5.0 |
| Protection | IP67 |
Covers Power Supply, Laser, LED, FCC, CB, Canadian, WEEE, and WWAN compliance.
Lists supported symbologies and explains the process of decoding bar codes.
Configuration of system properties, device ID, version, and power management.
Changing scanner configuration parameters.
Fundamental safety rules for operating the PM450 handy terminal.
Guidelines for safe use of the power supply and AC adapter.
Information regarding Industry Canada's radio transmitter approval.
Precautions and information regarding the Class 2 laser safety.
Details on FCC/EU RF exposure guidelines and compliance.
Step-by-step guide on how to install the battery into the terminal.
Instructions for charging the main battery pack using AC adapter or cradle.
General guidelines for safe use, storage, and disposal of battery packs.
Detailed technical specifications of the PM450 handy terminal.
Adjusting display backlight brightness and timeout.
Identification of components on the left side panel of the device.
Procedure for installing Micro SD memory cards into the device.
Identification of components on the top panel of the device.
Information about the mechanical connector for peripherals and communication.
Information on the Li-ion battery packs that supply power to the terminal.
Tips for maintaining continuous power supply and preventing data loss.
Identification of components on the right side panel of the device.
Identification of components on the bottom panel of the device.
Features of the intelligent battery technology and initial charging requirements.
Explanation of soft, hard, and factory reset procedures.
Procedure for decoding a bar code using the device.
List of all supported bar code symbologies for the laser engine.
Procedure for decoding a bar code using the laser engine.
Managing device power settings, including battery and USB charging.
Adjusting idle times, CPU power, alerts, wakeup sources, and battery info.
Customizing the function of programmable buttons on the terminal.
Procedure for installing software programs on the terminal.
Steps for connecting the terminal to a host via USB for ActiveSync.
Detailed technical specifications for the single slot and Ethernet cradles.
Identification of components on the front panel of the 4-slot charger.
Identification of the DC power jack on the back panel of the charger.
Detailed technical specifications for the 4-slot battery charger.
