Point Mobile PM450 - PM450 Technical Specifications

34
4.23. PM450 Technical Specifications
Model
PM450
Operating System
Windows Embedded CE 6.0 Professional
Windows Embedded Handheld 6.5 Professional
Application Software
Tools and Demos
Processor
Cortex-A8 1GHz
Memory
512MB RAM X 1GB Flash
Storage Expansion
User accessible Micro SD memory card slot
Display
240 x 320 pixels QVGA (Transmissive)
480 x 640 pixels VGA (day light readable) - option
Scan Engine
1D engine: SE-965HP
2D engine : N560X
Keypad
Numeric (32 keys)
Alpha-numeric (56 keys)
Audio
Built-in microphone and speaker
I/O
High Speed USB v2.0(480Mbps), USB Host is only for E-cradle which is based on a USB
to Ethernet chip
Battery
Standard Battery : 3.6V, 3120mAh, Li-ion Rechargeable
Extended Battery : 3.7V, 5200mAh, Li-ion Rechargeable
Expected Hours of
Operation
10 hours when using full-charged STD battery
15 hours when using full-charged EXT battery
Expected Charge Time
Standard Battery : under 4 hours
Extended Battery : under 6 hours
Charging Peripherals
Single Slot cradle–single-bay terminal charge/communicate
Single Ethernet cradle–single-bay terminal charge/communication base
(Via Ethernet connection)
Quad Battery Charger
WPAN
Bluetooth Class II (10 m) v2.1 Enhanced Data Rate (EDR) with internal antenna.
WLAN
Dual Mode 802.11 a/b/g/n (11 Mbps/54 Mbps) with internal antenna
WLAN Security
Wi-Fi Certified, 802.1X, WPA2, EAP, WEP, LEAP, TKIP, MSD, EAP-TLS, EAP-TTLS,
WPAPSK, PEAP, CCXv4
WWAN
GPRS/EDGE: Quad band, 850/900/1800/1900MHz
UMTS/HSPA: Five band, 800/850/900/1900/2100MHz
*Not Support Voice Service. Data Communication Only.
Operating
Temperature
-20°C to 50°C (-4°F to 140°F)
Charging Temperature
0~45℃ (±3℃))
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Humidity
95% humidity, non-condensing