point DUSTY700 - Specifications and Disposal; Technical Specifications

If the problems still cannot be solved according to the above, contact the after-sales service team for help.
Keep your body a minimum distance of 20cm away from this appliance while operating it.
* Due to continuous improvement of products, this product information is subject to the real product.
Model DUSTY 700
Rated Input 20 V DC, 1 A
Laser
max. power: 2.5mW
Frequency: 1.8KHz
Rotate Speed: 300±5 circle/min
Frequency bands
2412-2472MHz
Maximum transmitting power: 19 dBm.
Maximum RF power transmitted in the frequency
band
Max PA-uteekt vid 150 Mbps: 14 dBm
Max PA output power in 11b mode: 18dBm
O/Standby Mode Power Less than 0.50 W
Networked Standby Power Less than 2.00 W
Docking Station Model
CH1822
Input: 100-240V AC, 50-60Hz, 25W Output: 20V DC, 1A
Appliance parameters
NR Fel Orsak Lösning
It may be because the side
brushes and main brush are
entangled, or the dustbin and
filter material are blocked, etc.
It is recommended to clean and maintain the
side brushes, main brush, and dustbin and
filter material, etc. regularly.
The appliance has entered into
deep and strong cleaning mode.
Change back to standard cleaning mode.
The appliance may be stuck by a piece
of furniture that is similar in height to
it from the ground.
The appliance will try to get rid of the troubles in various
way, but if it still cannot get out of trouble, help it
manually.
The appliance is tangled or stuck by
wires, curtains or fringes of a carpet.
The appliance will try various methods to get rid of the
diculties, but if still not get out of trouble, it is
recommended to help it manually."
Obstacles such as wires and slippers
placed on the ground aect the
normal operation of the appliance.
Before the appliance works, sort out the scattered wires,
slippers and other objects on the ground to minimize the
scattered items on the ground. If any missing cleaning
area, the appliance will automatically trap and fix it, do
not interfere with the human(such as moving it or blocking
its route).
When the appliance climbs the steps,
thresholds and door strips,the drive
wheel is skidding with the ground,
which aects the judgment of the
appliance around the whole household
environment.
It is recommended to close the door in the
area and clean the area separately.
After the cleaning is completed, the
appliance will return to the starting point.
When operating on freshly waxed,
polished floors or a smooth tiled floor,
it will cause the friction to decrease
between the driving wheel and the
ground.
It is recommended to wait for the floor wax to dry
before using.
Because of dierent household
environments, some individual regions
cannot be entered for cleaning.
It is recommended to sort out the household
environment to ensure that the appliance can enter for
cleaning.
The LDS is blocked by something. Remove the material blocking the LDS.
11
10
9
A loud noise is
heard while
operating the
appliance.
The appliance is
trapped when
working.
When working, it
appears that the
cleaning route is in
a mess, or not
straight as normal,
or repeating or
missing cleaning
route happens,
etc.
16