To Next Page
M
myersandrewJul 27, 2025
What to do if my Vacuum Cleaner shows Error 2?
- RRobert BrownJul 28, 2025
If your Vacuum Cleaner displays Error 2, it might indicate a stuck bumper. First, check the bumper for any obstructions and gently touch it to ensure it moves freely. Also, ensure the appliance isn't stuck in a tight space or suspended. Reposition it if needed. Clean the cliff sensor regularly to prevent blockage from dust. Remove any yarn, wires, or debris from the main and side brushes, and clean them regularly. Check the main wheel for obstructions. Ensure the dust box and filter screen are correctly installed, replacing the filter if necessary. Clean the charging contacts on both the main body and the base station with a dry cloth. If the battery is low, recharge it.
General
