11
TROUBLESHOOTING
If the product does not operate or does not operate properly, first check according to the
following list. If the reason the product does not operate or does not operate properly is not
included in the following list, the product may have failed. At this time, it is recommended to
send the product to the dealer for repair.
Problem Possible Cause Solution
After the power is engaged,
the heater does not work.
The plug may not be correctly
inserted into the mains power
socket.
Check whether the plug is
properly inserted into the
mains power socket.
The heater suddenly stops
during heating.
The temperature exceeds the
threshold of the thermal
cut-o.
The system will automatically
cut o the power supply.
Cool the heater down before
using again.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least one time during the operating season
in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH
OFF AND UNPLUG THE APPLIANCE BEFORE CLEANING. Be sure to save the box for seasonal
storage.
• Turn the heater "OFF", unplug the appliance and wait for the heater to cool down.
• Use a dry cloth to clean the external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the appliance in the original carton and store it in a cool and dry place.
GB
To Next Page
Loading...