point PTD47W20 - Page 35

35
PROGRAMMING THE DISHWASHER
Wash Cycle Table
The table below shows which programs are best for the levels of food
residue on them and how much detergent is needed. It also show various
information about the programs.
( ) Means: need to fill rinse into the Rinse-Aid Dispenser.
Program
Description Of
Cycle
Detergent
Pre/Main
Running
Time (min)
Energy (Kwh) Water (L) Rinse Aid
Intensive
Pre-wash
(50°C)
Wash (70°C)
Rinse
Rinse
Rinse (70°C)
Drying
4/10g
140 1.2 9.6
(Or 3 in 1)
Universal
Pre-wash
Wash (60°C)
Rinse
Rinse (70°C)
Drying
4/10g
120 1.05 7.7
(Or 3 in 1)
(*EN 60436)
Pre-wash
Wash (45°C)
Rinse
Rinse (65°C)
Drying
14g
230 0.613 6.5
(Or 3 in 1)
Glass
Wash (45°C)
Rinse
Rinse (60°C)
Drying
14g
75 0.65 5.8
(Or 3 in 1)
90 Min
Wash (65°C)
Rinse (70°C)
Drying
14g
90 1.1 6.6
(Or 3 in 1)
Rapid
Wash (40°C)
Rinse
Rinse
12g 30 0.5 5.8
NOTE:
EN 60436: This program is the test cycle. The information for comparability
test in accordance with EN 60436.