3938
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify
these:
Codes Meanings Possible Causes
E1 Longer inlet time.
Faucets is not opened, or water intake
is restricted, or water pressure is too
low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overflow. Some element of dishwasher leaks.
WARNING
z
If overflow occurs, turn off the main water supply before calling for
service.
z
If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
Ed
Failure of communication
between main PCB with
display PCB.
Open circuit or break wiring for the
communication.
To Next Page
Loading...
