GEM Owner’s Manual - Page 92
NOTE: The vehicle is equipped with a four-wheel hydraulic braking
system.
TIRES
Proper tire ination pressure is essential to the safe and satisfactory
operation of your vehicle. Tire ination pressures are provided on your
vehicle’s VIN/Certication Label (See page 9, Figure 1).
Three primary areas are affected by improper tire pressure:
1. Safety
Under-ination increases tire exing and can result in tire failure. Over-
ination causes a tire to lose its ability to cushion shock. Objects on the road
and potholes could cause tire damage that may result in tire failure. Unequal
tire pressure can cause steering problems.
Operation and Maintenance
After inspecting or adjusting the tire pressure always reinstall the valve stem cap-if
equipped. This will prevent moisture and dirt from entering the valve stem, which
could damage the valve stem.
NOTICE
WARNING
Use standard DOT3 brake uid. Use of any other uid may result in loss of braking
ability, leading death or serious injury.
To Next Page
Loading...
