37
OPERATION
Driving Safely
Driving Procedures
1. Sit in the driver’s seat and fasten the seat belt.
2. After starting the engine and allowing it to warm up, shift the
transmission into gear.
3. Check your surroundings and determine your path of travel.
4. Release the parking brake.
5. Keeping both hands on the steering wheel, slowly depress the
throttle with your right foot and begin driving. Vehicle speed is
controlled by the amount of throttle opening and Polaris Variable
Transmission (PVT) shifting is automatic.
6. Drive slowly. Practice maneuvering and using the t hrottle and
brakes on level surfaces.
NOTE: Low is the primary gear for operating the RANGER 4X4.
High gear is intended for use on hard-packed surfaces with
light loads.
To Next Page
Loading...
