63
MAINTENANCE
Periodic Maintenance Interval Table
The following chart is a guide based on average riding conditions. You
may need to increase frequency based on riding conditions. When
inspection reveals the need for replacement parts, always use genuine
Polaris parts, available from your Polaris dealer.
I - Inspect (clean, adjust, tighten, lubricate, replace if necessary)
C - Clean R - Replace L - Lubricate
Item See
Page
Frequency
150 mi.
(240 km)
500 mi.
(800 km)
1000 mi.
(1600 km)
2000 mi.
(3200 km)
Pre-
Season
CLUTCH
Clutch Alignment Offset
(without belt)
82 II I
Drive Belt Condition 83 II II
Clutches (disassemble) 82 CC C
Belt Tension -- II II
Clutch Sheaves 82 II II
ENGINE
Engine Mounts -- II II
Engine Mounting Plate -- II I
Engine Torque Stop 85 II II
Cylinder Head Bolts -- II I
Cylinder Base Nuts -- II I I
Ignition Timing BTDC -- II I
Recoil Rope -- II II
Spark Plug Condition 71 II IRI
Exhaust Pipe 73 II
Exhaust Retaining
Springs
73 II II
To Next Page
Loading...
Need help?
General
