32
FEATURES
Instrumentation
MFD Digital Display Programs
Press the MODE button to cycle through the three MFD programs: Per-
formance, Engine and History. Each program will remain in the display
until another is selected.
TIP: The analog will always display either MPH or engine RPM (whichever set-
ting is selected) regardless of the display program being viewed.
Performance Program
The Performance Program automatically displays either speed or
tachometer, whichever is opposite the analog display. See page 31. It
also displays electrical system voltage and fuel level (if equipped).
While in the Performance mode, press the SET button to cycle through
the odometer, Trip 1, Trip 2, Trip F (if equipped with electronic fuel
gauge) and Clock settings.
To Next Page
Loading...
